Screed with sprayed PUR
Screed floor construction 4 & 5 - Choose a different floor structure
+7.5 cm - ground floor, basement, ... - with concrete slab, PUR insulation as substrate - tiles, multi-layer parquet, laminate, cork, carpet and vinyl - underfloor heating possible
Information
The sprayed PUR is applied under your screed as insulation for your floor structure. This can be sprayed on an uneven surface and around pipes.
Benefits
- Achieving a perfect end result without any experience
- Compartment of the screed = crack-free screed
- Replaces an uncoupling mat = savings of an average of 30 euros/m²
- Replaces the steel reinforcement mesh = savings of an average of 3 euros/m²
- No expansion joints needed in the screed = savings of an average of 3 euros/linear metre
- Spread screed work over several days (no stress during installation)
- Much faster start-up of underfloor heating possible = faster construction process
- No dishing/cupping of the screed = perfectly flat screed
Floor construction manual
Side view floor construction
View this floor construction in reality via Sack Zelfbouw
Legend
- Concrete
- Pipes (heating, electricity, drainage, etc.)
- Sprayed PUR
- PE foil (0,2 mm)
- Edge insulation 8 mm thickness
- Stainless steel grid (thickness from 4.5 to 9 cm)
- screed with 250 kg/m³ cement (incl. foil)
- Double bonding with S1 Flex Tile Adhesive
- Tile, multi-layer parquet, floating floor covering
- Water-resistant, coloured joint mortar
- Plinth
- flexible silicone
Side view floor construction with underfloor heating
Legend
- Concrete
- Pipes (heating, electricity, drainage, etc.)
- Sprayed PUR
- PE foil (0,2 mm)
- Underfloor heating
- Edge insulation 8 mm thickness
- Stainless steel grid (average 8 cm thickness)
- screed with 250 kg/m³ cement (incl. foil)
- Double bonding with S1 Flex Tile Adhesive
- Tile, multi-layer parquet, floating floor covering
- Water-resistant, coloured joint mortar
- Plinth
- flexible silicone
Placement video
Placement of the Staenis grid
Placing screed
Placing screed with height difference
We deliver screed in a silo to your home (only in Belgium)
By simply pressing a button on the silo, you can prepare fresh sand cement screed at a rate of 3 m³/h and this without time pressure to process the large amount of sand cement screed.
There are 2 separate compartments in the silo. 1 part filled with sand (0/4-0/7mm) and the other part filled with dry cement (250kg/m³). These are only mixed with water at the moment you wish.
The big advantage of this is that you can make fresh sand cement screed at your own pace and for a few weeks.
We deliver screed to your home in bags
Fast: Fast-drying, fiber-reinforced screed with only 2/3 of the weight compared to traditional screed. This makes the work considerably less difficult when you work with bagged material instead of traditional screed. Ideal for applying an adhesive screed screed floor or for small spaces, both indoors and outdoors. This Fast screed is easily spreadable, allowing you to achieve a flat finish more quickly.
We deliver insulation screed in bags to your home
The insulation screed is ready-made with new EPS pearls, mixed with cement, water and specific patented additives.
The EPS pearls have a special small diameter of 2mm-6mm, in order to obtain an even flatter result with the Staenis grid.
The insulating screed in bags is easy to transport and makes it possible to insulate your floor yourself.
This non-tilable insulation screed can be used as an insulating infill in the Staenis grid, single or double clad with at least 18 mm OSB. But also as an insulating filling layer, with a screed above it.
